The Latest Plastic Injection Molding Articles
September 23, 2022Auto plastic mold press means that in the ejection mold product stage in the production process of injection products, some mold products may not be effectively ejected for various reasons, resulting ...view
April 21, 2020The engineer in charge needs to prepare DFM to check the mold structure in detail. If there is any doubt, it needs to be clarified on the spot. If there is something wrong, it needs to be recorded and...view
December 16, 2020Overmolding is a method of injection molding in which an additional layer of material is added to an existing part. Usually soft resin is wrapped on hard plastic, and hard plastic is also wrapped with...view
July 1, 2022When molten plastics meet in multiple forms in a mold cavity due to insertion holes, regions of discontinuous flow rate, and regions of interrupted mold fill material flow, linear fusion joints are cr...view
March 13, 2023Injection molding is a processing method used in mass production of plastic parts. The specific principle is to inject the heated plastic raw materials into the cavity of the plastic injection mold un...view
November 11, 2021Ⅰ. The design principles of the straight top block for the automobile mould1. The mating length of the straight top link and the guide sleeve must be greater than 2/3 of the length of the link in the...view
Call us on: 
Email Us: 
No.23, XingYi Road, Wusha Community, Chang'an Town, Dongguan City, Guangdong Province, China. 
English
Deutsch
italiano
русский
français
română
العربية
Español
Polska
日本語
한국어
