July 29, 2024In the process of two-color injection molding, the problem of TPE soft material sticking to the mold is indeed an aspect that needs to be focused on. In order to improve the situation of TPE soft mate...view
June 9, 20261. Basic Concept and Classification of Molding Shot VolumeShot volume is a fundamental process parameter in plastic injection molding, defining the total mass or volume of molten plastic delivered int...view
June 9, 20261. Overview and Fundamental Principle of Injection Molding Residual StressResidual internal stress is a common inherent defect in plastic injection molding, referring to the balanced internal force ex...view
October 16, 2026Injection Mold Sliders: Principles, Application and MaintenanceOverview of Injection Mold SlidersThe slider of the injection mold is a key component used for lateral core pulling in injection molds, m...view
June 8, 2026The most critical component of high-gloss injection molding is the mold temperature control system. The primary distinction between high-gloss and standard injection molding is the control of mold tem...view
October 16, 2026How does the slider workThe core principle of the slider is to convert the vertical motion of the mold opening and closing into horizontal lateral motion, achieving the demolding of the lateral struct...view
Call us on: 
Email Us: 
1st Floor, Block1, No.3 Beiting Road, Houting Community, ShaJing Street, Bao'An District, Shenzhen City, Guangdong Province, China 
English
Deutsch
italiano
русский
français
română
العربية
Español
Polska
日本語
한국어