February 27, 2023In recent years, with the progress of science and technology and the improvement of people's safety awareness, people pay more and more attention to the quality of raw materials and products. In t...view
April 20, 2023First, let's take a look at what effects mold temperature has on injection molded products.Impact on appearanceFirst of all, the mold temperature is too low, it will reduce the melt flow, and may ...view
April 13, 2021As a mold supplier, HANKING MOULD ENGINEERING LTD. can provide the following services:1. Design of mold drawings.2. Design of product drawings.3. Mold injection molding analysis: mold flow analysis.4....view
March 24, 20221. The ejector pin of the plastic injection tooling is bent, broken or leakedThe quality of the self-made ejector is better, but the processing cost is too high. Now, standard parts are usually used, ...view
April 21, 20201. The vented injection machine used for degassing injection moulding is equipped with an exhaust port in the middle of the barrel, which is also connected to the vacuum system. When the plastic is pl...view
October 19, 2026Causes and CountermeasuresIn the injection molding industry, when molten plastic cannot fully fill the mold cavity, resulting in incomplete or deformed plastic parts, this phenomenon is called "i...view
Call us on: 
Email Us: 
1st Floor, Block1, No.3 Beiting Road, Houting Community, ShaJing Street, Bao'An District, Shenzhen City, Guangdong Province, China 
English
Deutsch
italiano
русский
français
română
العربية
Español
Polska
日本語
한국어